Sven Yrvind · βίντεο

Τι καλύπτει αυτό το βίντεο

Sven Yrvind modifies the bumpkin design on his boat, Urwind, to improve sail sheeting and storage.0:07 The new configuration features two side-mounted bumpkins that do not increase the vessel's overall length, allowing the boat to fit inside a shipping container.0:07 He uses a figure-eight knot and a removable tiller system to retract the rudder assembly for compact storage.1:04 Yrvind incorporates techniques learned from Japanese oyster fishermen, specifically the use of a "roo" or "yolo" oar system with a pin-and-hollow mechanism to prevent the oar from jumping out in rough weather.5:48 He plans to replace his current polyester lines with Dyneema or Spectra to reduce friction against stainless steel fittings.7:06 To secure the new bumpkin joints, he applies epoxy mixed with silica and injects additional epoxy into the vertical supports.8:57 Yrvind also considers future installation of an electric outboard motor but expresses concern regarding the fire risks associated with lithium batteries.3:00

Περισσότερα από το Sven Yrvind

Four Sheets of Divinycell for the Hull Sides – I Think That's Enough.Οκτ 2026Nervously Cutting the Divinycell Sheets.Οκτ 2026Trying to Get the Sheerline Right.Οκτ 2026More molds up.Οκτ 2026

Από Sven Yrvind — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.