Sailing NV · βίντεο

Τι καλύπτει αυτό το βίντεο

The crew of an Open 66, currently on the hard in North Borneo, completes the installation and initial startup of a new Nanni diesel engine.▶ 0:16 The refit process involves installing a custom polycarbonate control panel, a new gear lever requiring fiberglass modification to the hull, and a dual-valve RACOR fuel filter system designed to allow filter changes without re-bleeding the fuel lines.▶ 4:40 The engine installation requires filling the cooling system with 1.5 liters of coolant and adding 7.5 liters of high-quality oil.▶ 5:41 To prime the fuel system, the crew uses manual pumps to bleed air from the lines at multiple purge points until diesel flows clearly.▶ 9:53 After verifying the electrical connections for the glow plugs and starter motor, the engine starts on the first attempt.▶ 15:54 The new engine operates with significantly less noise and vibration than the previous 28-horsepower unit, allowing for normal conversation even with the engine room door open.▶ 16:23

Περισσότερα από το Sailing NV

The Adventure Is About To Get Bigger | S3 Ep 15Ιουν 2026We Found Langkawi's Hidden Paradise | S3 Ep 14Ιουν 2026Should We Swap Our Sailboat for One of These? | S3 Ep 13Ιουν 2026Family Sailing Through the Singapore & Malacca Straits | S3 Ep 12Μαΐ 2026

Από Sailing NV — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.