Sailing NV · vidéo

Ce que couvre cette vidéo

The crew of an Open 66, currently on the hard in North Borneo, completes the installation and initial startup of a new Nanni diesel engine.0:16 The refit process involves installing a custom polycarbonate control panel, a new gear lever requiring fiberglass modification to the hull, and a dual-valve RACOR fuel filter system designed to allow filter changes without re-bleeding the fuel lines.4:40 The engine installation requires filling the cooling system with 1.5 liters of coolant and adding 7.5 liters of high-quality oil.5:41 To prime the fuel system, the crew uses manual pumps to bleed air from the lines at multiple purge points until diesel flows clearly.9:53 After verifying the electrical connections for the glow plugs and starter motor, the engine starts on the first attempt.15:54 The new engine operates with significantly less noise and vibration than the previous 28-horsepower unit, allowing for normal conversation even with the engine room door open.16:23

Plus de vidéos de Sailing NV

Our Engine Room Is Flooding… Where Is the Water Coming From? | S3 Ep 21sept. 2026BEFORE YOU SERVICE YOUR MARINE DIESEL, WATCH THIS! | Nanni N4.65 Full Servicesept. 2026How to Save Your Boat at Anchor: 2-Anchor Systems Explained | S3 Ep 20août 2026We Didn't See This Coming... | S3 Ep 19août 2026

De Sailing NV — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.