BoatworksToday · βίντεο

Τι καλύπτει αυτό το βίντεο

Andy repairs five through-hull openings in a boat hull by grinding a double-bevel taper into the fiberglass, extending three inches from the hole edge to ensure a strong bond.1:03 He applies three layers of 1708 fiberglass cloth to both the interior and exterior sides of each opening.2:34 To prevent air pockets around the perimeter of the patches, he fills the shallow gaps with epoxy thickened with silica to a peanut butter consistency before applying the final glass layers.7:43 He replaces original plywood bulkheads with 1/2-inch Coosa nautical foam panels, reinforced with three layers of 1708 fiberglass on each side to achieve a final 3/4-inch thickness.12:41 After fairing the keel to 98% flatness, he dry-fits the new sole panels and bulkheads, achieving a precise fit against the hull and deck supports.15:29 Proper tapering and ensuring glass-to-glass contact are essential for structural integrity when patching through-hulls below the waterline.5:16

Περισσότερα από το BoatworksToday

Why Is My 920Ah Sailboat Battery Bank So Big FOR THIS TINY SAILBOAT?? This Is Why ;-)!Οκτ 2026New Epoch Batteries Just Landed for My Victron System But It's On Hold For Annapolis Boat Show Prep!Σεπ 2026I Was Wrong About My Boat's Victron Wiring (You Were Right!)Σεπ 2026Will This Entire Victron Electrical System Fit In My Little Boat?Αυγ 2026

Από BoatworksToday — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.