BoatworksToday · vidéo

Ce que couvre cette vidéo

Andy repairs five through-hull openings in a boat hull by grinding a double-bevel taper into the fiberglass, extending three inches from the hole edge to ensure a strong bond.1:03 He applies three layers of 1708 fiberglass cloth to both the interior and exterior sides of each opening.2:34 To prevent air pockets around the perimeter of the patches, he fills the shallow gaps with epoxy thickened with silica to a peanut butter consistency before applying the final glass layers.7:43 He replaces original plywood bulkheads with 1/2-inch Coosa nautical foam panels, reinforced with three layers of 1708 fiberglass on each side to achieve a final 3/4-inch thickness.12:41 After fairing the keel to 98% flatness, he dry-fits the new sole panels and bulkheads, achieving a precise fit against the hull and deck supports.15:29 Proper tapering and ensuring glass-to-glass contact are essential for structural integrity when patching through-hulls below the waterline.5:16

Plus de vidéos de BoatworksToday

Will This Entire Victron Electrical System Fit In My Little Boat?août 2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!août 2026V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!août 2026Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security Camerajuil. 2026

De BoatworksToday — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.