BoatworksToday · vídeo

O que este vídeo aborda

Andy repairs five through-hull openings in a boat hull by grinding a double-bevel taper into the fiberglass, extending three inches from the hole edge to ensure a strong bond.▶ 1:03 He applies three layers of 1708 fiberglass cloth to both the interior and exterior sides of each opening.▶ 2:34 To prevent air pockets around the perimeter of the patches, he fills the shallow gaps with epoxy thickened with silica to a peanut butter consistency before applying the final glass layers.▶ 7:43 He replaces original plywood bulkheads with 1/2-inch Coosa nautical foam panels, reinforced with three layers of 1708 fiberglass on each side to achieve a final 3/4-inch thickness.▶ 12:41 After fairing the keel to 98% flatness, he dry-fits the new sole panels and bulkheads, achieving a precise fit against the hull and deck supports.▶ 15:29 Proper tapering and ensuring glass-to-glass contact are essential for structural integrity when patching through-hulls below the waterline.▶ 5:16

Mais de BoatworksToday

I Wasn't Sure This Would Work | 42 Hour BBQ on Solar Power | Jackery HomePower 3600 Plus!jul. de 2026Keel Faired, Barrier Coat Applied ~ Last Hurdle Before Building the Interior Of This Sailboat!jun. de 2026Giraffe Tools x Boatworks | Bringing a 56-Year-Old Sailboat Back To Life!mai. de 2026Weeks Of Grinding Fiberglass Led To This Boat Restoration Moment!mai. de 2026

De BoatworksToday — veja o barco, a tripulação e cada vídeo analisado do canal.