Acorn To Arabella · βίντεο

Τι καλύπτει αυτό το βίντεο

Rot in the bowsprit of the schooner Arabella requires a structural repair using a Douglas fir graving piece and thickened epoxy. The rot originated in a spruce laminate pocket, likely present before launch, but remained contained by the glue lines between the laminates. After excavating the decayed wood, the repair involves carving a 12-to-1 tapered scarf joint and installing oak cheeks to distribute bolt compression loads.

Separately, the crew replaces the standing rigging’s lacing with heat-set Dyneema to eliminate creep. Previous attempts using standard Amsteel blue Dyneema resulted in persistent rig slack, as the material settled under load. The heat-set line, which undergoes tensioning and heating above 200 degrees Fahrenheit during manufacturing, provides significantly higher dimensional stability. This upgrade is necessary to support a new, large Code Zero sail, which increases the forward load on the mast and requires a rigid forestay to prevent interference. The crew sources specialized Vectran-core line for the sail’s tack and double-braid nylon for the sheets from Rigging Only in Fairhaven.

Περισσότερα από το Acorn To Arabella

We Stripped Our Wooden Sailboat Back to Bare Wood... AgainΟκτ 2026Saying Goodbye to Newfoundland—and the Man Who Inspired ArabellaΣεπ 2026Upgrading the Rudder and Another Trek To The CliffΑυγ 2026We're Climbing a Wall No One Has Ever Climbed Before | Rock Climbing on Newfoundland's South CoastΙουλ 2026

Από Acorn To Arabella — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.