Acorn To Arabella · vídeo

O que este vídeo aborda

Rot in the bowsprit of the schooner Arabella requires a structural repair using a Douglas fir graving piece and thickened epoxy. The rot originated in a spruce laminate pocket, likely present before launch, but remained contained by the glue lines between the laminates. After excavating the decayed wood, the repair involves carving a 12-to-1 tapered scarf joint and installing oak cheeks to distribute bolt compression loads.

Separately, the crew replaces the standing rigging’s lacing with heat-set Dyneema to eliminate creep. Previous attempts using standard Amsteel blue Dyneema resulted in persistent rig slack, as the material settled under load. The heat-set line, which undergoes tensioning and heating above 200 degrees Fahrenheit during manufacturing, provides significantly higher dimensional stability. This upgrade is necessary to support a new, large Code Zero sail, which increases the forward load on the mast and requires a rigid forestay to prevent interference. The crew sources specialized Vectran-core line for the sail’s tack and double-braid nylon for the sheets from Rigging Only in Fairhaven.

Mais de Acorn To Arabella

We Stripped Our Wooden Sailboat Back to Bare Wood... Again10/2026Saying Goodbye to Newfoundland—and the Man Who Inspired Arabella09/2026Upgrading the Rudder and Another Trek To The Cliff08/2026We're Climbing a Wall No One Has Ever Climbed Before | Rock Climbing on Newfoundland's South Coast07/2026

De Acorn To Arabella — veja o barco, a tripulação e todos os vídeos analisados do canal.

The Sailing Directory Newsletter

Um email com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira o seu endereço para receber a sua cópia.