BoatworksToday · βίντεο

Τι καλύπτει αυτό το βίντεο

To prepare a boat hull for painting, remove all surface texture from the primer using 320-grit sandpaper and a Festool RO 150 random orbital sander.4:48 Apply a black powder guide coat, such as the Mirka brand, to identify low spots or remaining texture; sand until the guide coat disappears completely.1:05 For dark colors like Infinity Blue, use a dark gray primer to ensure proper coverage, while light colors like Fighting Lady Yellow require a white primer.5:55

To apply Alexseal paint without the traditional "roll and tip" method, mix the paint, converter, and reducer at a 2:1:1 ratio, then add the Alexseal 5018 rolling additive.13:42 For a one-quart total mix, use 10 milliliters of the additive.14:11 When applying, use a lint-free roller, keep the paint layer thin, and avoid overworking the surface to prevent premature solvent evaporation.19:43 While the additive significantly reduces orange peel, full coverage may require multiple coats, especially if the primer was sanded through to the fiberglass.24:03

Περισσότερα από το BoatworksToday

Why Is My 920Ah Sailboat Battery Bank So Big FOR THIS TINY SAILBOAT?? This Is Why ;-)!Οκτ 2026New Epoch Batteries Just Landed for My Victron System But It's On Hold For Annapolis Boat Show Prep!Σεπ 2026I Was Wrong About My Boat's Victron Wiring (You Were Right!)Σεπ 2026Will This Entire Victron Electrical System Fit In My Little Boat?Αυγ 2026

Από BoatworksToday — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.