BoatworksToday · vidéo

Ce que couvre cette vidéo

To prepare a boat hull for painting, remove all surface texture from the primer using 320-grit sandpaper and a Festool RO 150 random orbital sander.4:48 Apply a black powder guide coat, such as the Mirka brand, to identify low spots or remaining texture; sand until the guide coat disappears completely.1:05 For dark colors like Infinity Blue, use a dark gray primer to ensure proper coverage, while light colors like Fighting Lady Yellow require a white primer.5:55

To apply Alexseal paint without the traditional "roll and tip" method, mix the paint, converter, and reducer at a 2:1:1 ratio, then add the Alexseal 5018 rolling additive.13:42 For a one-quart total mix, use 10 milliliters of the additive.14:11 When applying, use a lint-free roller, keep the paint layer thin, and avoid overworking the surface to prevent premature solvent evaporation.19:43 While the additive significantly reduces orange peel, full coverage may require multiple coats, especially if the primer was sanded through to the fiberglass.24:03

Plus de vidéos de BoatworksToday

Why Is My 920Ah Sailboat Battery Bank So Big FOR THIS TINY SAILBOAT?? This Is Why ;-)!oct. 2026New Epoch Batteries Just Landed for My Victron System But It's On Hold For Annapolis Boat Show Prep!sept. 2026I Was Wrong About My Boat's Victron Wiring (You Were Right!)sept. 2026Will This Entire Victron Electrical System Fit In My Little Boat?août 2026

De BoatworksToday — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.