BoatworksToday · video

Hva denne videoen dekker

To prepare a boat hull for painting, remove all surface texture from the primer using 320-grit sandpaper and a Festool RO 150 random orbital sander.4:48 Apply a black powder guide coat, such as the Mirka brand, to identify low spots or remaining texture; sand until the guide coat disappears completely.1:05 For dark colors like Infinity Blue, use a dark gray primer to ensure proper coverage, while light colors like Fighting Lady Yellow require a white primer.5:55

To apply Alexseal paint without the traditional "roll and tip" method, mix the paint, converter, and reducer at a 2:1:1 ratio, then add the Alexseal 5018 rolling additive.13:42 For a one-quart total mix, use 10 milliliters of the additive.14:11 When applying, use a lint-free roller, keep the paint layer thin, and avoid overworking the surface to prevent premature solvent evaporation.19:43 While the additive significantly reduces orange peel, full coverage may require multiple coats, especially if the primer was sanded through to the fiberglass.24:03

Mer fra BoatworksToday

Will This Entire Victron Electrical System Fit In My Little Boat?aug. 2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!aug. 2026V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!aug. 2026Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security Camerajuli 2026

Fra BoatworksToday – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.