Sailing With Phoenix | Oliver · βίντεο

Τι καλύπτει αυτό το βίντεο

A leaking raw water pump on an engine requires replacement to prevent saltwater corrosion on nearby electrical control panels.3:08 After discovering a slow drip, the owner removes the old pump, transfers the fittings to a spare unit, and installs it using a new gasket.14:16 To prevent the impeller from burning during the initial dry start, the pump housing and impeller are coated with petroleum jelly.21:36 A zip-tie technique helps compress the impeller vanes to fit the housing during reassembly.23:17 After mounting the pump and reconnecting the hoses, the owner opens the seacock and runs the engine to verify the repair.27:59 A minor leak from a secondary screw is resolved by tightening the fastener.30:37 The project takes approximately four hours to complete, though the owner notes that cleaning the resulting corrosion from the engine wiring remains a separate, future task.31:28

Περισσότερα από το Sailing With Phoenix | Oliver

38 days until I sail around the world without stopping Αυγ 2026First Sail Alone Since Sailing To Hawai'iΑυγ 202664 Days Until I Sail Nonstop Around The WorldΙουλ 2026I've been doing a bad job...Μαΐ 2026

Από Sailing With Phoenix | Oliver — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.