Fixing the Engine Before Sailing to Hawaii’s Big Island
24 September 2025 · 32 min · 7K views · Oahu
Hands fit yellow impeller into raw water pump
What this video covers
A leaking raw water pump on an engine requires replacement to prevent saltwater corrosion on nearby electrical control panels.▶ 3:08 After discovering a slow drip, the owner removes the old pump, transfers the fittings to a spare unit, and installs it using a new gasket.▶ 14:16 To prevent the impeller from burning during the initial dry start, the pump housing and impeller are coated with petroleum jelly.▶ 21:36 A zip-tie technique helps compress the impeller vanes to fit the housing during reassembly.▶ 23:17 After mounting the pump and reconnecting the hoses, the owner opens the seacock and runs the engine to verify the repair.▶ 27:59 A minor leak from a secondary screw is resolved by tightening the fastener.▶ 30:37 The project takes approximately four hours to complete, though the owner notes that cleaning the resulting corrosion from the engine wiring remains a separate, future task.▶ 31:28
More from Sailing With Phoenix | Oliver
From Sailing With Phoenix | Oliver — see the channel’s boat, crew, and every analysed video.