Sailing Suria · βίντεο

Τι καλύπτει αυτό το βίντεο

Maintenance and repair of Lewmar deck hatches require systematic disassembly, cleaning, and re-sealing to address leaks and detached handles. To service a hatch, remove the hinge, extract the spacers, and push out the side bolts to separate the lid from the frame.0:29 If the two halves remain stuck, use a makeshift puller—a bolt-and-nut assembly—to gently force them apart, then tap the frame with a rubber or plastic mallet to avoid damaging the aluminum.0:51 Remove old silicone sealant from the plexiglass and rubber gaskets using a sharpened plastic scraper, followed by petroleum to remove residue.3:17 Clean all components with soap and water or a melamine sponge.3:38 When reassembling, use cyanoacrylate adhesive to repair rubber gasket joints, holding the bond for several minutes to ensure durability.4:03 Lubricate hatch handles with silicone grease before re-installation.6:48 To re-attach loose handles, abrade the plexiglass surface with 150-grit sandpaper, clean thoroughly with alcohol to remove all oils, and clamp the handle for 24 hours.13:47

Περισσότερα από το Sailing Suria

High waves at the Cape and tropical paradise in MadeiraΣεπ 2026Sailing to Funchal - adventurous bus ride - new anchor app #boatlife #anchorappΣεπ 2026Foot injury! Anchoring off the dreamlike coast of Madeira #sailing #sailing #boatlifeΑυγ 2026Sailing to Madeira & Underwater Anode Replacement #bluewatersailing #liveaboard #sailing #diyΑυγ 2026

Από Sailing Suria — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.