Sailing Suria · vídeo

Qué cubre este vídeo

Maintenance and repair of Lewmar deck hatches require systematic disassembly, cleaning, and re-sealing to address leaks and detached handles. To service a hatch, remove the hinge, extract the spacers, and push out the side bolts to separate the lid from the frame.0:29 If the two halves remain stuck, use a makeshift puller—a bolt-and-nut assembly—to gently force them apart, then tap the frame with a rubber or plastic mallet to avoid damaging the aluminum.0:51 Remove old silicone sealant from the plexiglass and rubber gaskets using a sharpened plastic scraper, followed by petroleum to remove residue.3:17 Clean all components with soap and water or a melamine sponge.3:38 When reassembling, use cyanoacrylate adhesive to repair rubber gasket joints, holding the bond for several minutes to ensure durability.4:03 Lubricate hatch handles with silicone grease before re-installation.6:48 To re-attach loose handles, abrade the plexiglass surface with 150-grit sandpaper, clean thoroughly with alcohol to remove all oils, and clamp the handle for 24 hours.13:47

Más de Sailing Suria

High waves at the Cape and tropical paradise in Madeirasept 2026Sailing to Funchal - adventurous bus ride - new anchor app #boatlife #anchorappsept 2026Foot injury! Anchoring off the dreamlike coast of Madeira #sailing #sailing #boatlifeago 2026Sailing to Madeira & Underwater Anode Replacement #bluewatersailing #liveaboard #sailing #diyago 2026

De Sailing Suria — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.