Sailing Uma · βίντεο

Τι καλύπτει αυτό το βίντεο

Repairing deck holes on a sailboat requires matching the existing core material to maintain structural uniformity.7:54 When replacing sections of a balsa-cored deck, using end-grain balsa provides the highest strength-to-weight ratio and superior shear strength compared to foam or plywood.8:20 To prevent rot, installers must over-drill any through-deck penetrations, fill the void with thickened epoxy, and then drill the final bolt hole through the cured resin.9:31

To patch large deck openings, secure a plywood backing plate covered in plastic to the underside of the deck using hot glue to create a contour.6:27 Lay the balsa core into the opening from the outside, then laminate with biaxial fiberglass and chop strand mat.6:32 Using peel ply on the final layer creates a smooth, non-tacky finish that minimizes grinding.1:14 Stiffening the cabin top with additional fiberglass layers or internal bulkheads reduces deck flex, which prevents port light seals from failing under load.4:26

Περισσότερα από το Sailing Uma

We're Finally Setting Sail Again!Σεπ 20264 Hours to Rig Solar for an 8-Month Solo CircumnavigationΣεπ 2026Solar Sponsor Backed Out Before Sailing Around the World !Σεπ 2026Our boat won’t look the same after this | Step 495Αυγ 2026

Από Sailing Uma — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.