Sailing Uma · vídeo

O que este vídeo aborda

Repairing deck holes on a sailboat requires matching the existing core material to maintain structural uniformity.7:54 When replacing sections of a balsa-cored deck, using end-grain balsa provides the highest strength-to-weight ratio and superior shear strength compared to foam or plywood.8:20 To prevent rot, installers must over-drill any through-deck penetrations, fill the void with thickened epoxy, and then drill the final bolt hole through the cured resin.9:31

To patch large deck openings, secure a plywood backing plate covered in plastic to the underside of the deck using hot glue to create a contour.6:27 Lay the balsa core into the opening from the outside, then laminate with biaxial fiberglass and chop strand mat.6:32 Using peel ply on the final layer creates a smooth, non-tacky finish that minimizes grinding.1:14 Stiffening the cabin top with additional fiberglass layers or internal bulkheads reduces deck flex, which prevents port light seals from failing under load.4:26

Mais de Sailing Uma

We're Finally Setting Sail Again!set. de 20264 Hours to Rig Solar for an 8-Month Solo Circumnavigationset. de 2026Solar Sponsor Backed Out Before Sailing Around the World !set. de 2026Our boat won’t look the same after this | Step 495ago. de 2026

De Sailing Uma — veja o barco, a tripulação e cada vídeo analisado do canal.

The Sailing Directory Newsletter

Um e-mail com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira seu endereço para receber sua própria cópia.