Sailing Uma · vidéo

Ce que couvre cette vidéo

Repairing deck holes on a sailboat requires matching the existing core material to maintain structural uniformity.7:54 When replacing sections of a balsa-cored deck, using end-grain balsa provides the highest strength-to-weight ratio and superior shear strength compared to foam or plywood.8:20 To prevent rot, installers must over-drill any through-deck penetrations, fill the void with thickened epoxy, and then drill the final bolt hole through the cured resin.9:31

To patch large deck openings, secure a plywood backing plate covered in plastic to the underside of the deck using hot glue to create a contour.6:27 Lay the balsa core into the opening from the outside, then laminate with biaxial fiberglass and chop strand mat.6:32 Using peel ply on the final layer creates a smooth, non-tacky finish that minimizes grinding.1:14 Stiffening the cabin top with additional fiberglass layers or internal bulkheads reduces deck flex, which prevents port light seals from failing under load.4:26

Plus de vidéos de Sailing Uma

We Ditched Our Steering Wheel (And Built Something Better) | Step 496sept. 2026We're Finally Setting Sail Again!sept. 20264 Hours to Rig Solar for an 8-Month Solo Circumnavigationsept. 2026Solar Sponsor Backed Out Before Sailing Around the World !sept. 2026

De Sailing Uma — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.