Sailing Uma · βίντεο

Τι καλύπτει αυτό το βίντεο

To reinforce the hull of their 50-year-old coastal cruiser, Uma, the crew is installing a new internal structural matrix of foam ribs and stringers.1:11 They use 50mm by 100mm PVC foam as formwork, hot-gluing it to the hull before laminating it with two layers of biaxial fiberglass followed by two layers of unidirectional fiber.1:16 A horizontal stringer runs beneath the future countertop height to distribute loads, while additional layers of 650 biaxial glass are applied over the entire assembly to create a composite structure.1:49 The crew built a full-scale model of the hull section to test the lamination process and verify the thickness of the glass matrix, which measures approximately 1.4 centimeters.21:47 By aligning the new ribs with planned bulkheads and tapering the glass transitions, they aim to bridge the gap between the original hull and previous bilge repairs.25:51 This process effectively creates a new, rigid hull shell inside the existing one, designed to withstand offshore conditions.28:17

Περισσότερα από το Sailing Uma

We're Finally Setting Sail Again!Σεπ 20264 Hours to Rig Solar for an 8-Month Solo CircumnavigationΣεπ 2026Solar Sponsor Backed Out Before Sailing Around the World !Σεπ 2026Our boat won’t look the same after this | Step 495Αυγ 2026

Από Sailing Uma — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.