Sailing Uma · video

Hva denne videoen dekker

To reinforce the hull of their 50-year-old coastal cruiser, Uma, the crew is installing a new internal structural matrix of foam ribs and stringers.1:11 They use 50mm by 100mm PVC foam as formwork, hot-gluing it to the hull before laminating it with two layers of biaxial fiberglass followed by two layers of unidirectional fiber.1:16 A horizontal stringer runs beneath the future countertop height to distribute loads, while additional layers of 650 biaxial glass are applied over the entire assembly to create a composite structure.1:49 The crew built a full-scale model of the hull section to test the lamination process and verify the thickness of the glass matrix, which measures approximately 1.4 centimeters.21:47 By aligning the new ribs with planned bulkheads and tapering the glass transitions, they aim to bridge the gap between the original hull and previous bilge repairs.25:51 This process effectively creates a new, rigid hull shell inside the existing one, designed to withstand offshore conditions.28:17

Mer fra Sailing Uma

We're Finally Setting Sail Again!sep. 20264 Hours to Rig Solar for an 8-Month Solo Circumnavigationsep. 2026Solar Sponsor Backed Out Before Sailing Around the World !sep. 2026Our boat won’t look the same after this | Step 495aug. 2026

Fra Sailing Uma – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.