RAN Sailing · βίντεο

Τι καλύπτει αυτό το βίντεο

Construction of a 52-foot custom sailboat continues with the lamination of the port and starboard toe rails using fiberglass and vacuum bagging.▶ 0:53 The process involves saturating two layers of fiberglass on a table, rolling them onto the rail, and curing them under vacuum.▶ 1:38 Following the lamination, the project shifts to fairing and sanding the hull to achieve a uniform, professional finish.▶ 8:47 To bridge high and low spots, long boards—including 1200mm and 1400mm flexible sanding blocks from Flexi Sander—are used rather than orbital sanders.▶ 12:47 A guide coat of black powder reveals low spots during the sanding process, which are then filled with epoxy filler.▶ 18:54 The team notes that working in summer temperatures accelerates epoxy curing, preventing the sanding paper from gumming up.▶ 22:22 Achieving a fair hull requires multiple rounds of filling and sanding, with the goal of creating a continuous, smooth curve rather than a perfectly polished surface at this stage.▶ 11:15

Περισσότερα από το RAN Sailing

From Laser Precision to Endless Sanding - Ep. 497 Ran SailingΙουλ 2026Is This The Detail The Boat Has Been Waiting For? - Ep. 496 Ran SailingΙουλ 2026Port Side Toe Rail & Deckhouse Carbon Corners - Ep. 494 Ran SailingΙουλ 2026The Boat Gets Its Edge - Ep. 493 Ran SailingΙουν 2026

Από RAN Sailing — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.