RAN Sailingvídeo
The Hardest Part Of Building A Boat - Ep. 495 Ran Sailing
17 de julho de 2026 · 23 min · 92K visualizações · Skåne
O que este vídeo aborda
Construction of a 52-foot custom sailboat continues with the lamination of the port and starboard toe rails using fiberglass and vacuum bagging.▶ 0:53 The process involves saturating two layers of fiberglass on a table, rolling them onto the rail, and curing them under vacuum.▶ 1:38 Following the lamination, the project shifts to fairing and sanding the hull to achieve a uniform, professional finish.▶ 8:47 To bridge high and low spots, long boards—including 1200mm and 1400mm flexible sanding blocks from Flexi Sander—are used rather than orbital sanders.▶ 12:47 A guide coat of black powder reveals low spots during the sanding process, which are then filled with epoxy filler.▶ 18:54 The team notes that working in summer temperatures accelerates epoxy curing, preventing the sanding paper from gumming up.▶ 22:22 Achieving a fair hull requires multiple rounds of filling and sanding, with the goal of creating a continuous, smooth curve rather than a perfectly polished surface at this stage.▶ 11:15
Mais de RAN Sailing
De RAN Sailing — veja o barco, a tripulação e cada vídeo analisado do canal.
The Sailing Directory Newsletter
Um e-mail com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira seu endereço para receber sua própria cópia.