Sven Yrvind · βίντεο

Τι καλύπτει αυτό το βίντεο

Sven Yrvind walks through the port-side stowage layout of his small boat, Ulven, detailing how interior space is allocated across six numbered berth compartments.1:22 Compartments one, two, four, and five are assigned to water storage; compartment three holds batteries.1:30 A spare for compartment two exists, and a forward space could add roughly 30 liters of water if needed.2:59 He received a delivery from El Isolation in Laxå, supplied by Harriet, containing Teflon rod for locking systems, two 25 mm diameter tubes for the rotor hinge, and experimental hand-hole stock in 15 mm and 20 mm diameters — the 20 mm judged adequate, the 15 mm too thin.0:22 Compartment six requires laminate repair: removing the lead ballast damaged the inside lamination.1:37 Yrvind notes that a G11 rod handhold in that area shows no condensation, unlike stainless steel fittings, which draw cold from the outside and condense moisture below deck.2:15 The starboard side is next to be fitted out.3:16

Περισσότερα από το Sven Yrvind

Four Sheets of Divinycell for the Hull Sides – I Think That's Enough.Οκτ 2026Nervously Cutting the Divinycell Sheets.Οκτ 2026Trying to Get the Sheerline Right.Οκτ 2026More molds up.Οκτ 2026

Από Sven Yrvind — δείτε το σκάφος του καναλιού, το πλήρωμα και κάθε αναλυμένο βίντεο.

The Sailing Directory Newsletter

Ένα email με τις καλύτερες ανακαλύψεις του στόλου — τις στιγμές, τα σκάφη και τις ιστορίες που αξίζουν τον χρόνο παρακολούθησής σας. Εισάγετε τη διεύθυνσή σας για να λάβετε το δικό σας αντίγραφο.