Sail Lifevídeo
Sail Life - Settee finished (for now) - DIY sailboat refit
29 de septiembre de 2019 · 19 min · 74K visitas
Qué cubre este vídeo
Mads continues the interior refit of his 1987 Warrior 38, Athena, by constructing a new settee and preparing the hull for insulation.0:12 He builds the settee with a two-meter length to serve as a berth, using plywood supports scribed to the hull’s curvature and tabbing them in place with epoxy.7:41 To improve comfort, he redesigns the cushions to be lower and tapered, moving away from the original upright design.1:32 He also drills holes through the interior structure to route insulated PEX tubing for a future heating system.8:48 To address hull insulation, he adheres 10mm foam strips to the hull to act as spacers for 32mm Armaflex closed-cell foam, which will eventually be covered by wooden slats.10:56 Additionally, he evaluates two layout options for the head, ultimately selecting a design that prioritizes sink space and accessibility over technical area convenience.16:28 He plans to glass over an existing opening port light in the head to prevent condensation and simplify cleaning.15:12
Barcos en este vídeo
Más de Sail Life
De Sail Life — mira el barco del canal, la tripulación y cada vídeo analizado.
The Sailing Directory Newsletter
Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.