BoatworksToday · vídeo

Qué cubre este vídeo

Andy guts the interior of a 24-foot sailboat to prepare for a full refit, focusing on removing old bulkheads and grinding down fiberglass tabbing from the original sole.0:15 He uses a multi-tool with a carbide-tipped blade to cut through the fiberglass, noting that the tight access in the quarter berths significantly increased the labor time.3:52 The project involves replacing the sole with Kusa panels, using OSB as a template material to refine the fit before cutting the final material.7:00

Beyond the structural work, Andy evaluates two potential locations for a 162-pound, 600-amp-hour battery bank.7:53 Placing the batteries in the V-berth instead of the original midship location near the swing keel trunk would shift weight forward to offset the 10-horsepower outboard and cockpit load, while providing easier access for electrical components.12:25 This configuration, however, limits space for a potential head.15:34 The refit prioritizes weight distribution and interior utility for a boat intended primarily for single-handed coastal cruising.

Más de BoatworksToday

Will This Entire Victron Electrical System Fit In My Little Boat?ago 2026The Primer Mistake You're Probably Making Painting Your Boat: Film Thickness, Not Smoothness!ago 2026V-Berth Electrical Layout On A Small Sailboat: It's Tight, But It Should Work!ago 2026Putting the Anona Orbis Solar Camera to Work on My Property ~ 360 Security Camerajul 2026

De BoatworksToday — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.