BoatworksToday · vidéo

Ce que couvre cette vidéo

Andy guts the interior of a 24-foot sailboat to prepare for a full refit, focusing on removing old bulkheads and grinding down fiberglass tabbing from the original sole.0:15 He uses a multi-tool with a carbide-tipped blade to cut through the fiberglass, noting that the tight access in the quarter berths significantly increased the labor time.3:52 The project involves replacing the sole with Kusa panels, using OSB as a template material to refine the fit before cutting the final material.7:00

Beyond the structural work, Andy evaluates two potential locations for a 162-pound, 600-amp-hour battery bank.7:53 Placing the batteries in the V-berth instead of the original midship location near the swing keel trunk would shift weight forward to offset the 10-horsepower outboard and cockpit load, while providing easier access for electrical components.12:25 This configuration, however, limits space for a potential head.15:34 The refit prioritizes weight distribution and interior utility for a boat intended primarily for single-handed coastal cruising.

Plus de vidéos de BoatworksToday

Why Is My 920Ah Sailboat Battery Bank So Big FOR THIS TINY SAILBOAT?? This Is Why ;-)!oct. 2026New Epoch Batteries Just Landed for My Victron System But It's On Hold For Annapolis Boat Show Prep!sept. 2026I Was Wrong About My Boat's Victron Wiring (You Were Right!)sept. 2026Will This Entire Victron Electrical System Fit In My Little Boat?août 2026

De BoatworksToday — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.