Sailing With Phoenix | Oliver · vídeo

Qué cubre este vídeo

Replacing raw water intake hoses on a boat requires precise measurement and secure attachment methods to navigate tight, inaccessible spaces. Oliver, owner of the boat, attempts to replace aged raw water strainer hoses by pulling new lengths through a confined passage using a combination of stitching and duct tape.▶ 6:16 After an initial failure caused by an incorrect length measurement—resulting in a hose that was one foot too short—he returns to the project with the correct six-and-a-half-foot length.▶ 10:11 He emphasizes the importance of using high-quality, durable hose clamps and double-clamping connections to prevent leaks.▶ 13:47 During the installation, he notes that the original survey failed to document the neglected state of the vessel's plumbing, highlighting the necessity of independent inspection.▶ 17:35 The process involves clearing occluded strainers and preparing for subsequent maintenance tasks, including impeller replacement.▶ 21:20 Proper planning and accurate measurements are essential to avoid the frustration of repeated attempts in cramped, difficult-to-reach engine spaces.

Más de Sailing With Phoenix | Oliver

I've been doing a bad job...may 2026Installing A High Output Alternator ⚡️abr 2026Got a New Fuel Tank and Almost Killed My Vanabr 2026Phoenix Do Mar Is Bornmar 2026

De Sailing With Phoenix | Oliver — mira el barco del canal, la tripulación y cada vídeo analizado.