Sailing With Phoenix | Oliver · video

What this video covers

Replacing raw water intake hoses on a boat requires precise measurement and secure attachment methods to navigate tight, inaccessible spaces. Oliver, owner of the boat, attempts to replace aged raw water strainer hoses by pulling new lengths through a confined passage using a combination of stitching and duct tape.6:16 After an initial failure caused by an incorrect length measurement—resulting in a hose that was one foot too short—he returns to the project with the correct six-and-a-half-foot length.10:11 He emphasizes the importance of using high-quality, durable hose clamps and double-clamping connections to prevent leaks.13:47 During the installation, he notes that the original survey failed to document the neglected state of the vessel's plumbing, highlighting the necessity of independent inspection.17:35 The process involves clearing occluded strainers and preparing for subsequent maintenance tasks, including impeller replacement.21:20 Proper planning and accurate measurements are essential to avoid the frustration of repeated attempts in cramped, difficult-to-reach engine spaces.

More from Sailing With Phoenix | Oliver

38 days until I sail around the world without stopping Aug 2026First Sail Alone Since Sailing To Hawai'iAug 202664 Days Until I Sail Nonstop Around The WorldJul 2026I've been doing a bad job...May 2026

From Sailing With Phoenix | Oliver — see the channel’s boat, crew, and every analyzed video.

The Sailing Directory Newsletter

One email with the fleet's best finds — the moments, boats, and stories worth your watch time. Enter your own address to get your own copy.