Sailing Zephyr IV · vídeo

Qué cubre este vídeo

Dave installs a Sonihull SH Duo ultrasonic antifouling system on his 34-ft sailboat, Zephyr IV, to reduce reliance on traditional bottom paint.0:17 The installation requires mounting two transducers—one forward and one aft—directly to the interior of the hull using epoxy and aluminum mounting discs.0:32 He abrades the fiberglass surface to ensure a secure bond for the mounting rings, allowing six hours for the epoxy to cure before attaching the transducers.1:03 The control unit mounts under the chart table, wired to both the 240-volt AC shore power switchboard and the 12-volt house battery bank.4:11 He installs an inline 5-amp fuse on the DC circuit to prevent battery depletion.7:53 After completing the wiring, he confirms the system operates without interfering with the existing log or echo sounder instruments.8:07 The effectiveness of the ultrasonic transducers remains unverified until the next scheduled haul-out.8:24

Barcos en este vídeo

Más de Sailing Zephyr IV

Why Cowes Can Be A Sailor’s Nightmare (And How To Fix It)sept 2026I Took the BLUETTI Elite 100 V2 on a boat – Here's What Happenedago 2026Day in the Life of a Solo Sailor at 82 : Cowes to Poolejul 2026Boat Toilet Not Working? I Replaced the Jabsco Pump at 82!jul 2026

De Sailing Zephyr IV — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.