Flight Level Zerovídeo
DIY install of a Dometic A/C, a Microair Flex and installing a dry bilge pump.
23 de enero de 2026 · 29 min · 17K visitas
Man installing A/C ducting inside wooden sailboat cabin
Qué cubre este vídeo
The owner of a sailboat named Vanishing Point replaces a 20-year-old 12,000 BTU air conditioning unit with a new 16,000 BTU Dometic system.5:36 The installation involves removing the old unit, reusing the existing thermostat wire as a fish tape for the new control cable, and connecting the raw water intake, discharge, and condensation drain lines.19:32 To reduce the startup power draw, the owner installs a Microair Easy Start Flex soft starter on the compressor, utilizing Wago connectors to integrate the device into the existing capacitor wiring and removing the factory-installed PTCR start relay.26:48 Additionally, the owner installs a Bilge-B-Dry pump system with three pickups—two in the bilge sections and one in the engine bay—plumbing the discharge into the air conditioner’s raw water outlet line using a tee fitting.3:59 The system is wired to the 12-volt house battery bank to run on an automatic schedule.9:20 Finally, the owner replaces several cigarette lighter sockets throughout the vessel with dual USB-C and USB-A charging ports.29:00
Barcos en este vídeo
Más de Flight Level Zero
De Flight Level Zero — mira el barco del canal, la tripulación y cada vídeo analizado.
The Sailing Directory Newsletter
Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.