El Viaje de Bohemia · vídeo

Qué cubre este vídeo

The owners of a Bavaria 46 sailboat replace the vessel's standing rigging after 18 years of service to prevent mast failure.0:29 The project involves replacing the forestay, backstay, and all shrouds, including the upper and lower cross-shrouds.1:48 To ensure the mast remains stable during the process, the crew uses the spinnaker halyard and a Dyneema line as temporary supports while the primary shrouds are disconnected.3:07 The replacement kit, sourced from Selden, arrives with pre-swaged terminals and labeled components.2:08 During installation, the crew applies Lanolin to all metal-to-metal contact points to inhibit corrosion between the stainless steel rigging and the aluminum mast.5:10 The process requires disassembling the headsail furler to replace the internal forestay cable, which involves cutting the wire with a hand saw rather than a grinder to prevent heat-induced metal degradation.15:18 After reassembling the furler and tensioning the new rigging, the crew performs a final check of the mast alignment.20:38 Replacing the aging standing rigging provides the necessary structural security for future ocean passages.18:22

Barcos en este vídeo

Más de El Viaje de Bohemia

I NEVER WANT TO DO THIS ON A BOAT AGAIN [Ep.118] The Bohemia Voyagesept 2026WE TAKE THE BOAT OUT OF THE WATER… AND FIND A DISASTER [Ep.117] The Journey of Bohemiaago 2026The hardest experience we had to live through in Mexico COMES TO AN END [Ep.116] The Bohemia Voyageago 2026We thought about SELLING THE BOAT after EVERYTHING that happened to us in MEXICO [Ep. 115] The Bohemia Journeyago 2026

De El Viaje de Bohemia — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.