El Viaje de Bohemia · vidéo

Ce que couvre cette vidéo

The owners of a Bavaria 46 sailboat replace the vessel's standing rigging after 18 years of service to prevent mast failure.0:29 The project involves replacing the forestay, backstay, and all shrouds, including the upper and lower cross-shrouds.1:48 To ensure the mast remains stable during the process, the crew uses the spinnaker halyard and a Dyneema line as temporary supports while the primary shrouds are disconnected.3:07 The replacement kit, sourced from Selden, arrives with pre-swaged terminals and labeled components.2:08 During installation, the crew applies Lanolin to all metal-to-metal contact points to inhibit corrosion between the stainless steel rigging and the aluminum mast.5:10 The process requires disassembling the headsail furler to replace the internal forestay cable, which involves cutting the wire with a hand saw rather than a grinder to prevent heat-induced metal degradation.15:18 After reassembling the furler and tensioning the new rigging, the crew performs a final check of the mast alignment.20:38 Replacing the aging standing rigging provides the necessary structural security for future ocean passages.18:22

Bateaux dans cette vidéo

Plus de vidéos de El Viaje de Bohemia

I NEVER WANT TO DO THIS ON A BOAT AGAIN [Ep.118] The Bohemia Voyagesept. 2026WE TAKE THE BOAT OUT OF THE WATER… AND FIND A DISASTER [Ep.117] The Journey of Bohemiaaoût 2026The hardest experience we had to live through in Mexico COMES TO AN END [Ep.116] The Bohemia Voyageaoût 2026We thought about SELLING THE BOAT after EVERYTHING that happened to us in MEXICO [Ep. 115] The Bohemia Journeyaoût 2026

De El Viaje de Bohemia — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.