Building Orca - Episode 19: Installing Transom Planking Pt. 3
17 de noviembre de 2025 · 13 min · 25K visitas
Qué cubre este vídeo
Louis Sauzedde installs the second layer of Atlantic white cedar planking on the transom of the boat Orca.▶ 0:08 He mixes epoxy by volume at a 2-to-1 ratio using a slow hardener, then applies the adhesive to the first layer of planking using a toothed trowel to ensure consistent coverage.▶ 1:00 To secure the planks while the glue cures, he uses construction screws fitted with double washers to prevent the hardware from leaving impressions in the wood.▶ 5:25 After the glue sets, he removes the screws and cleans excess squeeze-out with denatured alcohol.▶ 8:45 He addresses potential pillowing—where glue pools between fasteners—by monitoring the surface during the clamping process.▶ 9:18 He finishes the surface using an electric plane, a number 5 Stanley hand plane, and a custom dust-free sander to achieve a smooth, flat finish.▶ 10:19 The completed transom features two layers of quarter-sawn cedar, chosen for its dimensional stability, and includes copper lettering designed to create intentional staining patterns.▶ 11:45
Más de Tips from a Shipwright
De Tips from a Shipwright — mira el barco del canal, la tripulación y cada vídeo analizado.