Sailing Uma · vídeo

Qué cubre este vídeo

Dan and Kika install two custom water tanks in the v-berth of their 12-meter sailboat, prioritizing a modular design that allows for easy removal and maintenance.▶ 0:04 They construct a removable forward bulkhead using epoxy and glass, securing the tanks against movement while ensuring they remain accessible.▶ 1:05 To prevent structural stress, they line the support surfaces with cork and position the tanks over a reinforced hull rib.▶ 16:30 The system holds approximately 250 liters of water, split between two tanks to provide redundancy for long-distance passages.▶ 13:02 Dan uses 15mm PEX tubing and reusable SeaTech (now Aqualock) push-fit fittings to plumb the system, routing the lines to a service locker behind the head.▶ 23:01 The design allows the tanks to slide forward for removal without requiring a full disassembly of the plumbing.▶ 22:36 Dan notes that the pump and accumulator system requires careful orientation to avoid potential leaks near the motor.▶ 27:07 The project aims to reduce bow weight by replacing heavy stored materials with the water tanks while creating a dry, functional living space.▶ 15:25

Más de Sailing Uma

Uma is Ready to Launch! (But there's a catch) | Step 489jun 2026How Many Sails Does it Take To Replace a Diesel Engine? | Step 488may 2026Turning Our Powerboat Back Into a Sailboat | Step 487may 2026We Cut our Mast in Half | Step 486may 2026

De Sailing Uma — mira el barco del canal, la tripulación y cada vídeo analizado.