Sailing Uma · vidéo

Ce que couvre cette vidéo

Dan and Kika install two custom water tanks in the v-berth of their 12-meter sailboat, prioritizing a modular design that allows for easy removal and maintenance.0:04 They construct a removable forward bulkhead using epoxy and glass, securing the tanks against movement while ensuring they remain accessible.1:05 To prevent structural stress, they line the support surfaces with cork and position the tanks over a reinforced hull rib.16:30 The system holds approximately 250 liters of water, split between two tanks to provide redundancy for long-distance passages.13:02 Dan uses 15mm PEX tubing and reusable SeaTech (now Aqualock) push-fit fittings to plumb the system, routing the lines to a service locker behind the head.23:01 The design allows the tanks to slide forward for removal without requiring a full disassembly of the plumbing.22:36 Dan notes that the pump and accumulator system requires careful orientation to avoid potential leaks near the motor.27:07 The project aims to reduce bow weight by replacing heavy stored materials with the water tanks while creating a dry, functional living space.15:25

Plus de vidéos de Sailing Uma

Our boat won’t look the same after this | Step 495août 2026The ONE Thing We Disagreed on This Entire Refit | Step 494août 2026We Owe You The Full Storyjuil. 2026We spent $10,000 on something Pretty | Step 493juil. 2026

De Sailing Uma — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.