Epic Navigator · vídeo

Qué cubre este vídeo

A single half-turn on a cleat gives a sailor dynamic control over a docking line — the core technique Alexandros Retsinas demonstrates throughout.0:22 The method works single-handed or with a crew member stationed at the cleat while the skipper controls the helm.0:07 One half-turn around the cleat creates enough friction to stop the line with finger pressure alone; adding a second hand increases control further.0:32 From that position, the line can be eased or taken in to millimeter precision, slack can be pulled instantly on command, and the line can be fully secured in milliseconds by adding the crossing and twisting finish.0:26 Retsinas distinguishes clearly between the dynamic position — half-turn only, ready to ease or take in — and the fully secured position, which requires the crossing and locking coils.1:49 The key rule: do not cross and twist until the boat is in its final position, because doing so ends dynamic adjustment.1:49 The practical takeaway is that a single half-turn, not a full cleat hitch, is the correct hold during active maneuvering.1:05

Más de Epic Navigator

Catamaran Crabbing & Repositioning | Getting Into an Impossible Berthsept 2026The most common mistake when maneuvering your sailing boatago 2026Be ready for this | Failed Gearbox Cable ago 2026The Standard Marina Setupjul 2026

De Epic Navigator — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.