Sailing Zephyr · vídeo

Qué cubre este vídeo

A failing Volvo shaft seal on the 40-foot sailboat Zephyr caused significant seawater ingress into the engine compartment during a coastal passage from New Bern, North Carolina.10:55 The crew discovered three inches of water in the bilge while motoring, identifying the source as the rubber boot of the shaft seal, which had worn down its internal carbon lip seals after approximately eight years of service.11:45 To resolve the leak, the crew performed an emergency haul-out at Zimmerman Marine near Holden Beach.14:29 Technicians disconnected the propeller shaft from the transmission, removed the seized coupling using hydraulic equipment, and replaced the worn seal.16:12 During the repair, the crew also replaced the pitted, corroded shaft coupling to ensure precise engine-to-shaft alignment and installed new sacrificial anodes to prevent further underwater metal corrosion.19:43 The repair required approximately 15 hours of labor.13:15 Regular monitoring of shaft seal integrity and engine alignment is essential to prevent catastrophic water ingress during operation.

Más de Sailing Zephyr

We Finally Fixed the Worst-Looking Part of Our Boat Ep. 277jun 2026We Somehow Made It To The Bahamas...Then The Boat Work Started - Ep.276jun 2026Our New Boat Finally Hits The Water - Ep. 275may 2026The Reality of Getting This Boat Ready - Ep. 274may 2026

De Sailing Zephyr — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.