Sailing Zephyr · vidéo

Ce que couvre cette vidéo

A failing Volvo shaft seal on the 40-foot sailboat Zephyr caused significant seawater ingress into the engine compartment during a coastal passage from New Bern, North Carolina.10:55 The crew discovered three inches of water in the bilge while motoring, identifying the source as the rubber boot of the shaft seal, which had worn down its internal carbon lip seals after approximately eight years of service.11:45 To resolve the leak, the crew performed an emergency haul-out at Zimmerman Marine near Holden Beach.14:29 Technicians disconnected the propeller shaft from the transmission, removed the seized coupling using hydraulic equipment, and replaced the worn seal.16:12 During the repair, the crew also replaced the pitted, corroded shaft coupling to ensure precise engine-to-shaft alignment and installed new sacrificial anodes to prevent further underwater metal corrosion.19:43 The repair required approximately 15 hours of labor.13:15 Regular monitoring of shaft seal integrity and engine alignment is essential to prevent catastrophic water ingress during operation.

Plus de vidéos de Sailing Zephyr

We Finally Fixed the Worst-Looking Part of Our Boat Ep. 277juin 2026We Somehow Made It To The Bahamas...Then The Boat Work Started - Ep.276juin 2026Our New Boat Finally Hits The Water - Ep. 275mai 2026The Reality of Getting This Boat Ready - Ep. 274mai 2026

De Sailing Zephyr — voir le bateau, l'équipage et chaque vidéo analysée de la chaîne.

The Sailing Directory Newsletter

Un e-mail avec les meilleures trouvailles de la flotte — les moments, les bateaux et les histoires qui valent la peine d'être regardés. Entrez votre adresse pour recevoir votre propre exemplaire.