Leading the Escapade · vídeo

Qué cubre este vídeo

The crew of the sailboat *Escapade* replaces nine aging bronze through-hull fittings with composite TruDesign valves while hauled out at Panamarina in Panama.0:11 The team removes the original fittings by grinding four cuts into the exterior flange and using a hammer and chisel to break the seal, often requiring a heat gun to soften the old sealant.1:39 After removing the old hardware, they sand the hull back to the gel coat, apply a barrier coat to protect exposed fiberglass, and use a mixture of epoxy resin and cabosil to fill any uneven divots.3:11 They dry-fit the new composite fittings to ensure proper alignment of the ball valve handles, then use calipers to measure and cut the threaded stems to the correct length.11:35 To prevent thread damage during cutting, they thread a nut onto the fitting before using a hacksaw.12:51 The final installation uses 3M 4200 sealant on the threads to secure the valves in the desired orientation.20:18

Más de Leading the Escapade

WE’RE BACK AT SEA! 🌴 San Blas, Boat Repairs & Insurance Update! Ep-235sept 2026Back on the Water in Bocas del Toro… 🌴 Ep-234ago 2026We Had No Choice But to Let Them Lift Our Boat Again… Ep-233ago 2026They Damaged Our Boat… And We Were Left To Fix It! Ep-232ago 2026

De Leading the Escapade — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.