Sailing Uma · vídeo

Qué cubre este vídeo

Applying spray-on cork insulation to a boat hull requires a specific, porridge-like consistency to ensure proper adhesion and prevent the binder from separating from the cork particles.2:53 Initial attempts to spray the material failed because the mixture was too thin, a problem compounded by the addition of water and improper mixing techniques.0:52 To achieve the correct application, the material must be mixed for at least 15 to 20 minutes without adding any water.16:25 Proper preparation involves cutting the bottom of the bag to ensure the glue and cork are dispensed together, rather than dumping the bag and allowing the binder to settle at the bottom of the bucket.8:54 Maintaining a consistent, thick, creamy texture throughout the spraying process is critical; having a second person continuously mix the material while the sprayer operates prevents the mixture from settling or clogging the spray gun.14:37

Más de Sailing Uma

Solar Sponsor Backed Out Before Sailing Around the World !sept 2026Our boat won’t look the same after this | Step 495ago 2026The ONE Thing We Disagreed on This Entire Refit | Step 494ago 2026We Owe You The Full Storyjul 2026

De Sailing Uma — mira el barco del canal, la tripulación y cada vídeo analizado.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que merecen tu tiempo de visionado. Introduce tu dirección para recibir tu propia copia.