Sailing Uma · video

Hva denne videoen dekker

Applying spray-on cork insulation to a boat hull requires a specific, porridge-like consistency to ensure proper adhesion and prevent the binder from separating from the cork particles.2:53 Initial attempts to spray the material failed because the mixture was too thin, a problem compounded by the addition of water and improper mixing techniques.0:52 To achieve the correct application, the material must be mixed for at least 15 to 20 minutes without adding any water.16:25 Proper preparation involves cutting the bottom of the bag to ensure the glue and cork are dispensed together, rather than dumping the bag and allowing the binder to settle at the bottom of the bucket.8:54 Maintaining a consistent, thick, creamy texture throughout the spraying process is critical; having a second person continuously mix the material while the sprayer operates prevents the mixture from settling or clogging the spray gun.14:37

Mer fra Sailing Uma

Solar Sponsor Backed Out Before Sailing Around the World !sep. 2026Our boat won’t look the same after this | Step 495aug. 2026The ONE Thing We Disagreed on This Entire Refit | Step 494aug. 2026We Owe You The Full Storyjuli 2026

Fra Sailing Uma – se kanalens båt, mannskap og alle analyserte videoer.

The Sailing Directory Newsletter

Én e-post med flåtens beste funn – øyeblikkene, båtene og historiene som er verdt din seertid. Skriv inn din egen adresse for å få din egen kopi.