YACHTING STEADFASTvideo
PITCHING THE BILGE PART II Sealing the bow of a wooden sailing vessel by filling the bilge pockets.
14 de agosto de 2026 · 3 min · 3 vistas · Cambridge, Maryland
¿Qué cubre este video?
Steven Uhthoff fills non-draining bilge pockets in the bow of a 1934 William Hand–designed ketch with number three asphalt (low-odor) as part of a major bow repair underway in Cambridge, Maryland since August 2024.0:05 The repair replaced a rotted oak stem and knee with purpleheart, and re-planking and re-caulking of the majority of the hull are ongoing.1:23 Pouring hot asphalt — heated to roughly 400 degrees Fahrenheit using a large propane burner to melt blocks of the material — seals the new construction in areas of the bilge that cannot drain.2:28 A smaller burner cuts portions off the solid blocks before melting.2:41 The product is inexpensive and available in block form; the crew improvised melting vessels from a sacrificed teapot and pots sourced at a local Goodwill.2:56 Uhthoff notes that finding any prior documentation on this specific technique — filling non-draining bow bilge pockets with asphalt on a wooden vessel — proved difficult, which motivated sharing the process.0:05 Hot asphalt poured while still fluid flows into tight spaces between new frames and planking, sealing them completely once cooled.0:19
Más de YACHTING STEADFAST
De YACHTING STEADFAST — ve el barco, la tripulación y cada video analizado del canal.
The Sailing Directory Newsletter
Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.