Atom Voyagervideo
Replacing Chainplates on an Alberg 30
15 de mayo de 2016 · 4 min · 10K vistas
¿Qué cubre este video?
The original 3/16-inch by 1 1/4-inch chainplates on an Alberg 30 show significant corrosion and insufficient sizing.0:11 Replacing these requires upgrading to larger plates and increasing bolt diameter.0:23 The installation process involves adding plywood reinforcement to the existing knees, which are then glassed in to provide structural support.0:54 To ensure proper alignment against the bulkheads, the new chainplates are set into thickened epoxy while wrapped in plastic to prevent bonding.2:38 Once the epoxy cures, the plates are drilled and secured with polysulfide sealant.3:13 The project also includes installing fiberglassed-in backing pads for a running backstay pad eye.0:43 While some installations utilize metal backing plates, the combination of a solid fiberglass layup, wood reinforcement, and correctly sized fender washers provides sufficient strength.3:13 The configuration allows for the future addition of a solent stay, which can be attached to a dedicated pad eye or stored aft against a shroud.3:40
Barcos en este video
Más de Atom Voyager
De Atom Voyager — ve el barco, la tripulación y cada video analizado del canal.
The Sailing Directory Newsletter
Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.