Entre Terras e Mares · video

¿Qué cubre este video?

Edgar and his crew fabricate custom sliding tracks for a new companionway hatch to allow the two-part hatch covers to overlap and fully clear the entrance. They first create a mold at the Woods on Water workshop, using paulownia wood for its strength-to-weight ratio.1:26 Back at the boat, they laminate the tracks using chopped fiberglass strands to navigate the narrow profile, then reinforce the structure with a full fiberglass mat.6:00 The team mounts the tracks using a combination of Sikaflex adhesive and screws.12:03 To ensure a watertight seal and structural integrity, they drill oversized holes, fill them with epoxy, and re-drill to prevent water intrusion into the core.14:14 The final design features a 10-centimeter overlap between the two hatch sections to minimize leakage.16:13 The installation allows the hatch to slide completely open, preventing head clearance issues when entering or exiting the cabin.16:03 The crew plans to finish the installation with final sanding, painting, and permanent side closures.16:48

Más de Entre Terras e Mares

90% of the STRUCTURE is READY S1.ep 183jul 2026WE FINISHED the bow cabin LAMINATE ! S1.ep182jun 2026WE DID IT, WE FINISHED PART OF THE FORMICA IN THE BOW SUITE S1.ep 181jun 2026This week the focus was on something elsejun 2026

De Entre Terras e Mares — ve el barco, la tripulación y cada video analizado del canal.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.