SmoCo Sailing · video

¿Qué cubre este video?

Armand and Liya relocate two rigid solar panels on their sailboat to prevent the mainsheet from snagging during jibes.▶ 0:14 The original installation on the bimini frame caused interference with the traveler and mainsheet.▶ 5:54 To resolve this, they rotate the panel array 90 degrees, narrowing the footprint by 10 inches on each side.▶ 5:45 The pair constructs a support frame using aluminum angle iron to avoid galvanic corrosion between the panels and the metal structure.▶ 3:00 Before disconnecting the electrical system, they cover the panels with blankets to prevent arcing and verify zero-watt output using the Victron app.▶ 1:54 They secure the panels with nylon washers to eliminate vibration and noise.▶ 3:53 The project concludes with wiring and a plan to seal the gap between panels with caulk.▶ 7:11 The owners note that using 5200 sealant between panels proved ineffective, as the heat caused the adhesive to melt and drip onto the deck and teak.▶ 7:21

Más de SmoCo Sailing

[Ep 73] Blue Water, White Sand Beach, & An Abandoned Resort | Exploring Punta Chivatoago 2026[Ep 72] Santa Rosalía Mechanics Couldn't Solve This | Fridge Fail in Mexicojul 2026[Ep 71] 120-Mile Sail for a Surprise Reunion | Sailing Down Baja Mexico in the Sea of Cortezjul 2026[Ep 68] This Was Supposed to Be an Overnight Stop | Alcatraz Cove in Bahia de los Angelesjun 2026

De SmoCo Sailing — ve el barco, la tripulación y cada video analizado del canal.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.