SmoCo Sailing · vídeo

O que este vídeo aborda

Armand and Liya relocate two rigid solar panels on their sailboat to prevent the mainsheet from snagging during jibes.▶ 0:14 The original installation on the bimini frame caused interference with the traveler and mainsheet.▶ 5:54 To resolve this, they rotate the panel array 90 degrees, narrowing the footprint by 10 inches on each side.▶ 5:45 The pair constructs a support frame using aluminum angle iron to avoid galvanic corrosion between the panels and the metal structure.▶ 3:00 Before disconnecting the electrical system, they cover the panels with blankets to prevent arcing and verify zero-watt output using the Victron app.▶ 1:54 They secure the panels with nylon washers to eliminate vibration and noise.▶ 3:53 The project concludes with wiring and a plan to seal the gap between panels with caulk.▶ 7:11 The owners note that using 5200 sealant between panels proved ineffective, as the heat caused the adhesive to melt and drip onto the deck and teak.▶ 7:21

Mais de SmoCo Sailing

[Ep 73] Blue Water, White Sand Beach, & An Abandoned Resort | Exploring Punta Chivato08/2026[Ep 72] Santa Rosalía Mechanics Couldn't Solve This | Fridge Fail in Mexico07/2026[Ep 71] 120-Mile Sail for a Surprise Reunion | Sailing Down Baja Mexico in the Sea of Cortez07/2026[Ep 68] This Was Supposed to Be an Overnight Stop | Alcatraz Cove in Bahia de los Angeles06/2026

De SmoCo Sailing — veja o barco, a tripulação e todos os vídeos analisados do canal.

The Sailing Directory Newsletter

Um email com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira o seu endereço para receber a sua cópia.