kentblairlvideo
How To Change A Sunfish Sailboat Bow Handle
10 de julio de 2024 · 8 min · 744 vistas
¿Qué cubre este video?
Replacing the bow handle on a Sunfish sailboat manufactured after 1987 requires caution to prevent the internal wooden backer block from falling into the hull.0:11 These handles attach via screws that penetrate the fiberglass deck into a wooden block secured by a fiberglass strap and glue.0:18 Over decades, this adhesive can fail, causing the block to detach.0:33 To prevent the block from dropping, leave one original screw in place while pivoting the old handle out and installing the new one.1:10 If the block does detach, repair requires removing the metal deck edge trim, splitting the deck-to-hull seam, and re-gluing the block with epoxy or polyester resin.7:17 Because the pot metal handles corrode and the internal wood may rot, the handle should not be used as a primary lifting point or for heavy-duty winching.3:08 Snug all fasteners evenly to ensure proper alignment and prevent stripping the wood.4:37
Más de kentblairl
De kentblairl — ve el barco, la tripulación y cada video analizado del canal.
The Sailing Directory Newsletter
Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.