Sailing Triteia · video

¿Qué cubre este video?

Stepping a mast on an Alberg 30 requires a custom-built wooden A-frame, though the process becomes significantly more dangerous as rig weight increases. After a test lift revealed excessive flexing in an existing A-frame, the crew reinforced the structure using double 2x4s for the legs and added side braces to manage the load of a new, 200-pound mast.0:30 The previous rig weighed between 70 and 100 pounds, making the original A-frame design sufficient for that lighter load.8:17 During the final lift, the crew used halyards to help raise the A-frame into position before securing the mast.1:34 Following the successful step, the crew installed Stay-Lok fittings, high-modulus rigging, and a roller furler.7:28 The project also required recutting a mainsail that was 11 inches too large and returning an incorrectly sized headsail to a marine surplus store.10:01 While the DIY method proved functional, the owner noted the process felt unnecessarily hazardous for a rig of this weight and does not recommend repeating it without professional equipment.8:58

Barcos en este video

Más de Sailing Triteia

Victoria Arrives to Victoria, Mahe, Seychelles and We Sail to Silhouette Islandago 2026Forney Cove on Santa Cruz Island From The Channel Islands Cruising Guideago 2026Dangerous Sailing in Coral Passes & Storms in the Maldives on a 30ft Sailboatago 2026Pushing Through The Maldives - Cruising in Paradise At the Wrong Time of Yearago 2026

De Sailing Triteia — ve el barco, la tripulación y cada video analizado del canal.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.