Living For Sail · video

¿Qué cubre este video?

John repairs a 1.75-inch diameter hole in the bow of his boat, *Antidote*, by grinding a 12-to-1 bevel into the 0.75-inch thick fiberglass hull.0:44 Following the West Systems manual, he uses a 4.5-inch angle grinder equipped with a dust-extraction shroud and diamond-puck grinding discs to achieve the taper while minimizing airborne fiberglass dust.7:00 He confirms the hull thickness against *The Elements of Boat Strength* by Dave Gerr, which prescribes a minimum thickness of 5/8-inch for the vessel's scantlings.9:38 After cleaning the area and installing an internal backing plate with peel ply, he applies the initial fiberglass layers, opting to place the chopped strand mat (CSM) side outward to facilitate easier fairing.26:51 Separately, he removes rotten plywood from the starboard bulwark and uses a new brushless die grinder with a 6-inch double-cut bit to clear resin from pockets behind bronze backing plates.20:24 A 12-to-1 bevel provides sufficient structural integrity for a single-sided fiberglass repair when access to the interior is limited.10:13

Barcos en este video

Más de Living For Sail

This Was Inside The Boat!? — Should I Put It Back?sep 2026BACK to Work on ANTIDOTE! - How I Used 3D Printing to Fix My Boatago 2026⛵️ I Tried Boiling Water Out of My Boat... It Actually Worked - sort of?!jul 2026⛵️ This DIY Sailboat Repair Has To Work... Right?jun 2026

De Living For Sail — ve el barco, la tripulación y cada video analizado del canal.

The Sailing Directory Newsletter

Un correo electrónico con los mejores hallazgos de la flota: los momentos, barcos e historias que valen tu tiempo de visualización. Ingresa tu propia dirección para obtener tu propia copia.