Living For Sail · vídeo

O que este vídeo aborda

John repairs a 1.75-inch diameter hole in the bow of his boat, *Antidote*, by grinding a 12-to-1 bevel into the 0.75-inch thick fiberglass hull.0:44 Following the West Systems manual, he uses a 4.5-inch angle grinder equipped with a dust-extraction shroud and diamond-puck grinding discs to achieve the taper while minimizing airborne fiberglass dust.7:00 He confirms the hull thickness against *The Elements of Boat Strength* by Dave Gerr, which prescribes a minimum thickness of 5/8-inch for the vessel's scantlings.9:38 After cleaning the area and installing an internal backing plate with peel ply, he applies the initial fiberglass layers, opting to place the chopped strand mat (CSM) side outward to facilitate easier fairing.26:51 Separately, he removes rotten plywood from the starboard bulwark and uses a new brushless die grinder with a 6-inch double-cut bit to clear resin from pockets behind bronze backing plates.20:24 A 12-to-1 bevel provides sufficient structural integrity for a single-sided fiberglass repair when access to the interior is limited.10:13

Barcos neste vídeo

Mais de Living For Sail

This Was Inside The Boat!? — Should I Put It Back?09/2026BACK to Work on ANTIDOTE! - How I Used 3D Printing to Fix My Boat08/2026⛵️ I Tried Boiling Water Out of My Boat... It Actually Worked - sort of?!07/2026⛵️ This DIY Sailboat Repair Has To Work... Right?06/2026

De Living For Sail — veja o barco, a tripulação e todos os vídeos analisados do canal.

The Sailing Directory Newsletter

Um email com os melhores achados da frota — os momentos, barcos e histórias que valem o seu tempo de visualização. Insira o seu endereço para receber a sua cópia.